CODELOCKS 5OOO ELECTRONIC Manual do Utilizador descarregar pdf (Página 20)

30mm

”)

Front depth off door: 70mm (2

/4”)

Codelocks CL4000 Range

Technical Speciﬁcations

Door thickness 35mm - 65mm (1

/8”-2

/2”)

Spindle type 8mm (

/16”) spring loaded spindle

Body material Zinc alloy

Non handed Lock will ﬁt doors hung on the

left or right

Mortice Latch (CL4010)

Medium duty, stainless steel latchbolt head with

“anti” shim deadlocking plunger, 8mm (

/16”)

follower.

60mm (2

/8”) backset, requires 25mm (1”) hole,

82mm (3

/4”) deep.

70mm (2

/4”) backset, requires 25mm (1”) hole,

92mm (3

/16”) deep.

Mortice Lock (CL4020)

Euro proﬁle mortice sash lock with deadbolt

and latchbolt. Complete with double cylinder to

control deadbolt and to retract latchbolt. With

the deadbolt locked it denies access to a code

user. The key can be used to open doors for

management functions such as security and

cleaning. The split follower enables the inside

lever to retract the deadbolt and latch

to prevent accidental lock in when the

deadbolt is thrown.

Keypad 2 x 5

Buttons Individual, stainless steel.

Operations 200,000

Low battery warning

Red LED will ﬂash on opening to indicate

batteries need to be changed.

Finishes available

PVD (Physical Vapour Deposition) hardwearing

low maintenance ﬁnishes SS (stainless steel)

and PB (polished brass).

REM 1 Lock ﬁtted as standard with remote

release (REM1) terminal. This can be used to open

the lock via remote wired switch (not supplied)

REM 2 Lock ﬁtted as standard with remote alarm

release (REM2) terminal. This can be used when

linked to an alarm system to activate the lock to

the open state for 30 minutes.

Codes

 •Codesmaybe4,5or6digitslong.Providing

a possible 1,110,000 code combinations.

 •Thelockmemorywillstore80different

User Codes,

 •Thelockmemorycanstore10different

One Time User Codes.

Code Free mode can be set electronically at

the keypad or mechanically by means of the

override key.

Key override As standard the lock has a key

override function

Keying alike Locks can be supplied as keyed

alike on request

Key cylinder change From lock front (5 pin)

Storeroom function Locks ﬁtted with storeroom

function tailpiece as standard. i.e. latch can be

retracted by key when turned.

Classroom function Classroom function tailpiece

supplied to allow (when ﬁtted) lock to be left in

code free mode when key is removed

Batteries 4xAA Cells.

For internal and external use.

CL4010 Mortice Latch

Outside lever turns freely without operating

the latchbolt. When valid code is entered

and blue light burns, the lever will retract the

latchbolt. When the door closes the spring

latch will automatically lock the door. The key

will open the door for management functions.

The key may be used to set the lock into Code

Free mode so that anyone can open the door

without using a code. Code Free mode can

also be programmed at the keypad using the

Master Code.

CL4020 Full Mortice Lock

with Safety Feature

Outside lever and key functions as CL4010.

Lockcase key retracts latchbolt for entry

without using a code. Key controls the

deadbolt position. When deadbolt is projected

it denies access by code. When deadbolt is

projected the safety feature allows the inside

lever handle to retract the deadbolt and the

latchbolt, preventing people being accidentally

locked in.

Programming Options

01 - Enter new User Code

02 - Suspend User Code

03 - Restore User Code

04 - Suspend all User Codes

05 - Restore all User Codes

06 - Set unlock time

07 - One-time User Codes

08 - Set Code Free mode

09 - Cancel Code Free mode

10 - Change Master Code

11 - Cancel emergency open

12 - Delete all User Codes

13 - Set or change Sub-Master Code

14 - Delete Sub-Master Code

15 - LED locked / unlocked status

CL4010

CL4020

Codelocks2010-A5-Inner.indd 38-39 17/2/10 09:20:19

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Comentários a estes Manuais

Sem comentários

CODELOCKS 5OOO ELECTRONIC Manual do Utilizador Página 20

Comentários a estes Manuais